FIND YOUR IDEAL EV CHARGING SOLUTION
CO2 EMISSIONS g/km†
As low as 71
Fuel Consumption Combined - TEL-TEH: mpg (l/100km)‡
Up to 84.1-74.3 (3.4-3.8)
Our PHEV range can fully charge from either a domestic socket or an IEC connector*. It is ideally suited to charge overnight, fully recharging in as little as 7.5 hours, enabling emissions free commuting for up to 30 miles. Installing and using a wall box can reduce charging times to 2.75 hours*.
*requires accessory Multi-function charging cable
For charging your Plug-in Hybrid vehicle away from home, you can use public charging stations. These can be found at motorway service stations††, fuel stations and public car parks. Connect Pro will highlight charging points along your route.**
Find charge points, their type and availability through the Zap-Map website.
††requires accessory Public charging cable.
HOME CHARGING CABLE — STANDARD
All Land Rover PHEV vehicles come with a Home Charging Cable (Mode 2 Charging Cable). The cable connects to domestic sockets and supports a charging time of as little as 7.5 hours. The cable can be used no matter what the weather. Please check with your Land Rover Retailer for charge times in your area.†
MULTI-FUNCTION CHARGING CABLE — ACCESSORY
A full charge can be achieved in as little as 2.75 hours* using the accessory Multi-function Charging Cable (Mode 2 Universal Charging Cable) and a dedicated wall box. The interchangeable adapter allows you to use the cable abroad, through a regional specific two or three pin plug variant.†
PUBLIC CHARGING CABLE — ACCESSORY
For when you’re on the move, the Public Charging Cable (Mode 3 Charging Cable) enables you to connect with AC charging stations. The cable is compatible with a home wall box, which an Land Rover approved supplier can install at your home.†
HOME WALL BOX
Our approved wall box suppliers and installers will ensure any work is carried out to the highest standards. The robust wall box can be fitted at a suitable location convenient to you. Ask your Land Rover Retailer for more information.
Regenerative braking uses the electric motor to harvest kinetic energy whilst braking, converting it into electrical energy that is used to recharge the high voltage battery. This process begins the second you remove your foot from the accelerator, as well as during braking. Regenerative Braking does not replace charging your vehicle but will supplement the charge available during your journey.
CHOOSE YOUR MODEL
*Charge times may vary depending on your household electricity supply.
**Certain stations may require registration or a pay as you go tariff.
†Extension leads and adaptors should never be used with any electrical vehicle or charge cable.
Charging equipment may vary from market to market. For more information please contact your local retailer.